Blem Oval 700 Praxis X M30 Hollow Forged Crank Arm Set 172.5 Road 160/104 BCD

  
For sale is one new, open-stock, blemished. Oval 700 Praxis X-Spider M30 Hollow Forged Alloy Double Crank Arm Set, 172.5mm, Matte Black; for Praxis M30 Bottom Brackets (BSA, BB86, BB30/PF30 shells; 30mm Drive/28mm NonDrive); Proprietary 4-arm 160/104 BCD. Condition Note: Minor blemish on non-drive arm; one inner bolt has damage to the socket rim from a wrench slip but is still functional and not easily seen on the innner side. Stock image shown first and second; third image shows blemished parts. These cranks are suitable for Praxis M30 bottom brackets , which have a step-down'GXP style' 30mm drive/28mm non-drive bearing. They are compatible with BSA, BB86, BB30/PF30 shells, but must have the M30 bottom bracket to accommodate the 30mm/28mm spindle. The Oval 700 are quality cranks found on many comp-level builds. Proprietary 4-Arm X-Spider 160/104 BCD. M30 AL Spindle - 30mm with 28mm step-down. Requires Praxis M30 BB: BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive). Notes M30 spindles taper to 28mm on the non-drive side; they are not compatible with other 30mm systems. When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you're replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause. Includes cranks and fasteners only; chainrings, wave washer, etc. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap). If not properly secured, these caps are subject to vibrating loose and becoming lost.

These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service.

If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap.

I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Please expect about 3-5 days for arrival. Do feel free to contact me if you have any questions or concerns.

Thank you so much for looking! This item is in the category "Sporting Goods\Cycling\Bicycle Components & Parts\Cranksets". The seller is "blodwulf" and is located in this country: US. This item can be shipped worldwide.

1. Number of Chainrings: Double
2. Material: Aluminum
3. Part Type: Crank Arms
4. Crankarm Length: 172.5mm
5. Bottom Bracket Shell Type: M30
6. Compatible Bike Type: Cyclocross Bike, Road Bike - Racing, Road Bike - Touring
7. Brand: Oval