New Oval 610 Boost Crank Arm Set 104 BCD 170 mm Praxis M35 MTB Hollow Forged

  
For sale is one new, open-stock. Oval 610 Boost 1x Crank Arm Set, 170mm, Matte Black; for Praxis M35 Bottom Brackets (BB30/PF30/OSBB AL shells; 35mm Drive/33mm NonDrive); 4-arm 104BCD. Shown is a stock image. This crank arm set shows minor evidence of surface wear from open-box storage. Shall have a small, superficial blemish or two. Blemishes are fairly inoffensive and little compared to what may be expected with normal use.

It has never been driven. Stock image shown; product shall be a random inventory pull. These cranks are suitable for Praxis M35 bottom brackets , which have a step-down'GXP style' 35mm drive/33mm non-drive bearing. Boost spacing for optimal chainline (not recommended for non-Boost systems).

They are compatible with 73mm BB30/PF30/OSBB AL shells, but must have the M35 bottom bracket to accommodate the 35mm/33mm spindle. Hollow forged alloy for strength and low weight. The Oval 610 are quality cranks found on many comp-level builds.

Not recommended for non-Boost frames. M35 AL Spindle - 35mm with 33mm step-down. Requires Praxis M35 BB: BB30/PF30/OSBB AL (35mm Drive/33mm NonDrive). Made from Hollow Forged Aluminum.

Notes M35 spindles taper to 33mm on the non-drive side When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you're replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause.

Includes cranks and fasteners only; chainrings, wave washer, etc. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap).

If not properly secured, these caps are subject to vibrating loose and becoming lost. These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service.

If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap.

I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Please expect about 3-5 days for arrival. Do feel free to contact me if you have any questions or concerns.

Thank you so much for looking! This item is in the category "Sporting Goods\Cycling\Bicycle Components & Parts\Cranksets". The seller is "blodwulf" and is located in this country: US. This item can be shipped worldwide.

1. Custom Bundle: No
2. Number of Chainrings: Double
3. Material: Aluminum
4. Crankarm Length: 170mm
5. Part Type: Crank Arms
6. Compatible Bike Type: Mountain Bike
7. MPN: M610
8. Modified Item: No
9. Non-Domestic Product: No
10. Brand: Oval
11. Bottom Bracket Shell Type: M35